Blog Page 2
Error
  • JUser: :_load: Unable to load user with ID: 77
Friday, 21 October 2011 08:59

Imbalance errors

Category: Operation & Use
Topic: Centrifuge Operation

Imbalance errors are caused by unbalanced loads or imbalance switch signals triggering the error.

Friday, 21 October 2011 08:57

Loading the Rotor

Category: Operation & Use
Topic: Centrifuge Installation & Set-up

For centrifugation safety and maximum results, the rotors and buckets may only be loaded symmetrically with all containers distributed evenly on all rotor positions. For authorized combinations, see the section "Rotors and Accessories" and "Loading the Rotor" in the Product Manual supplied with the centrifuge. Or, click here to download the Product Manual for your centrifuge.

Friday, 21 October 2011 08:56

Mains Interrupt

Category: Operation & Use
Topic: Error Codes & Remedies

AC power failure occurred during the centrifugation run. (The centrifugation run was not finished.)

Friday, 21 October 2011 08:53

Product Registration

Category: Operation & Use
Topic: Centrifuge Installation & Set-up

Your safety is most important to us. Product registration is an important way we can help you stay informed with all the latest information regarding your centrifuge. It is fast; takes less than 2 minutes!

Friday, 21 October 2011 08:52

Product Support Time Length

Category: Other
Topic: General

The product support period is normally 10 years from the last date of production. Hettich typically tries to maintain a stock of support parts that will last through the product support period.

Friday, 21 October 2011 08:49

Recalling a Program

Category: Operation & Use
Topic: Centrifuge Operation

Rotina 380, Rotina 420, Rotanta 460 & Rotanta 460 Robotic:

Press the PROG key. The parameter RCL is displayed.

Friday, 21 October 2011 08:47

Removal of Packaging

Category: Operation & Use
Topic: Centrifuge Installation & Set-up

Remove all strapping from the carton.

Lift the carton upward and remove the padding.

Category: Operation & Use
Topic: Centrifuge Operation

Tacho (tachometer) errors are errors in the system that recognizes motion of the rotor.

To clear Tacho Errors 1, 2, & 96:

Open lid, turn power off. Make sure rotor is properly attached to the motor.

Friday, 21 October 2011 08:22

Removal of Transport Bolt

Category: Operation & Use
Topic: Centrifuge Installation & Set-up


A brief tutorial on how to remove the transport bolts on your Hettich centrifuge. This video pertains to most centrifuge models. Any questions please contact Hettich service ( This email address is being protected from spambots. You need JavaScript enabled to view it. ).

A brief tutorial on how to remove the transport bolts on your Hettich centrifuge. This video pertains to most centrifuge models. Any questions please contact Hettich service ( This email address is being protected from spambots. You need JavaScript enabled to view it. ).
Friday, 21 October 2011 08:19

Installation of Transport Bolts

Category: Operation & Use
Topic: Centrifuge Installation & Set-up


A brief tutorial on how to re-install the transport bolts on your Hettich centrifuge. This video pertains to most centrifuge models. Any questions please contact Hettich service ( This email address is being protected from spambots. You need JavaScript enabled to view it. ).
Page 2 of 2