A NON-CENTRIFUGAL CONCENTRATOR
The Hettich Vortex Vacuum Concentrator (HVC) is designed to remove solvents from samples while under vacuum. Unlike traditional centrifugal evaporation methods, the HVC uses a vortex motion with infrared heating and an intelligent vacuum pump to remove solvent from samples.
The picture demonstrates the Hettich Vacuum Concentrator with sliding lid (robot friendly) and the loading of the heated base plate with attached universal rack. The rack will then sit in the 316 stainless steel chamber attached via its magnetically coupled feet. After the rack is loaded the lid will close and the evaporation process will begin.
The HVC offers 3 types of heating for constant and consistent sample temperatures.
- Ceramic infrared heaters built into the lid of the HVC
- Interior chamber wall heating to prevent condensation
- An optional base plate heater with a range of 20 to 40 °C.
The heating is activated by a temperature probe inside the evaporation chamber that is set by the user to the desired sample temperature. As evaporation occurs and the sample cools and the heating is activated to maintain the sample set temperature.
The HVC was designed to be robotic friendly with its RS232 connectivity, programmability and ability for robotic arms to have easy access to the sample. The lid of the HVC slides to the left completely exposing the sample chamber, this provides easy interfacing for robotics.
Sample Racks & Base Plate
A variety of racks are available for the HVC to accommodate both microplates, tubes and microtubes plus any combinations of the above. A number of custom accessories are available such as to purge inert gases onto a microplate.
Utilizing the most current technology, Hettich manufactures its products to meet the latest in industry quality standards. All Hettich products go through rigorous in-house testing. Product quality tests are supervised by the major governing bodies (i.e. TUV) to ensure the highest level of safety in manufacturing. The metal components that make up our products go through a variety of stress tests and are studied to determine risk and product life cycle.
- Dimensions (width x depth x height)
- Power source
- Power consumption
- Vacuum chamber: material
- Vacuum chamber: diameter | height
- Connector: vacuum pump
- Connector: release/ inert gas inlet
- Vortex speed
- Temperature control range:
- 765 mm (lid closed) 930 mm (lid open) x 695 mm x 470 mm
- 80 kg
- 115Vac 50/60 Hz, 230Vac 50/60 Hz upon request
- 1800 VA
- 3 x RS232 (VP, CT, PC)
- 316 Stainless steel (V4A)
- 360 mm | 180 mm
- 6mm stainless steel Swagelok fitting
- 20 to 80°C
- V0 plastic UL-listed
THE POLESTAR COLDTRAP
The PoleStar cold trap has been designed to meet the most demanding requirements of the evaporation process and to ensure the highest flexibility for the condensation or solvent recovery of solvents.
The closed loop cooling system cools the cooling coils down to –50°C. This ensures that all solvents condense on the coils protecting the vacuum pump. The cooling coils plus the chamber is PTFE coated for maximum chemical resistance.
- Power Source
- Power Consumption
- Cooling Temperature
- Gas inlet/ outlet
- Top cover, base plate
- Back panel
- 520 x 430 x 530 mm
- 51 kg
- 230Vac 50/60 Hz or 115Vac 50/60 Hz
- 660 VA (3.15A)
- 3.3 Liter
- - 50°C
- Aluminum FEP coated
- Stainless steel 316 (V4A)
- FEP coated
- PTFE, connectors 316 (V4A) steel
- 304 (V2A) stainless steel
The intelligent vacuum pump used with the HVC is a diaphragm pump with variable speed and a minimum vacuum of 0.6 Mbar. The pump is extremely quiet compared to other systems on the market.
The pump measures vapor pressure and adjusts its speed to the parameters chosen by the HVC.
By linking programs in the HVC and utilizing the features of the vacuum pump complex solvent mixture can be evaporated to dryness.
The pump has three modes of operation, the two that are mainly used by the Hettich Vacuum Concentrator are the PREC mode which will pull a vacuum to a desired mbar at a specified speed and the AUTO mode which measures the vapor pressure and adjusts the speed automatically.
- Max pumping speed
- Ultimate vacuum (absolute) without gas ballast
- Ultimate vacuum (absolute) with gas ballast
- Permissible ambient temperature storage
- Permissible ambient temperature operation
- Permissible relative atmospheric moisture during operation (no condensation)
- Power (electric)
- No-load speed
- Max permissible range of supply voltage (±10%)
- Max nominal current draw
- Device fuse
- Motor protection
- Degree of protection IEC 529
- Dimensions (LxWxH) mm
- 2.8 m3/h
- 0.6 mbar
- 2 mbar
- -10 to +60°C
- -10 to +40°C
- 30 to 85%
- 575 W
- 30-2400 min-1
- slow blow
- thermal cutout
- IP 20
- 422 x 258 x 516
- 21 kg
We Answer Your Questions By Answering Your Calls
Whether online, in person or over the phone, Hettich is here to help.
Toll Free: 1.866.370.4388