Determination of the Water Retention Value (WRV) in Pulp and Paper Manufacturing
The water retention value (WRV) is an essential parameter in pulp and paper manufacturing. It indicates the ability of a sample of wood fiber or pulp mass to retain water.
The WRV changes during the manufacturing process. For instance, it rises continuously during the grinding process due to the increasing separation into fibers. The WRV consequently provides valuable information on the impact of the individual steps in the pulping process on the fibers produced and to what degree the pulp mass is suitable for paper manufacture.
The method used to determine the WRV has been standardized and is described in the international standard ISO 23714:2007. Whereas in the past, the sample holders were specially manufactured and therefore expensive or had to be fabricated for their intended use, Hettich now offers a test-padholding unit of type A.1 as given in ISO 23714:2007 as standard centrifuge accessories.
The test-pad-holding unit
The test-pad-holding unit has three parts, all of stainless steel:
- A test-pad basket, 35 mm in height, with an internal diameter of 25 mm
- A fine-mesh wire with an aperture of 125 µm and a mesh diameter of 90 µm
- A bottom-perforated vessel that accommodates the precision-fit wire and the stainless steel basket holding the sample under analysis.
- For centrifugation, the filled test-pad-holding unit is placed in a plastic adapter that retains the water released during the centrifugation process.
- The entire insert fits into a standard centrifuge carrier and can be sealed with a lid.
Summary of the advantages of the centrifuge insert
- The test-pad-holding unit is of stainless steel
- The centrifuge carrier remains corrosion-free because no liquid accumulates; the liquid is retained in the plastic adapter.
- Simple and safe to use
- After centrifugation, the sample can be easily removed from the test-pad holding unit for further processing.
- Easy to clean
- The carrier lid reliably prevents evaporation during centrifugation
- Fits into standard centrifuge accessories
Method
ISO 23714:2007 “Pulps – Determination of water retention value (WRV).”
